Sunday, December 06, 2020

More Shavehorse

 I glued up the platform that holds the table and the dumb head today.

 
 
The rails are sized, the build should go quickly said the fool with the keyboard.
 
I should add: I first stated the build would be with Osage Orange but it is Honey Locust. Brain fart on this end although from a working stand point not a lot of difference, both are miserable to work.

ken


Monday, November 30, 2020

Trump is Gone

 Trump is gone, might be a little early but I'm down with the song.

Trump is gone.

New Norton Washita Stone

 Sharpening Supply is selling new Norton Washita stones. The price is right, IIRC less than $40 USD, so I decided to give one a go for no other reason than curiosity. I have no need for more stones but I'm a stone sucker. 

Here is a photo of some of my Washita stones:


The new Norton stone is bottom right. To the bottom left is a Norton "Lilly White". The middle stone is a Pike "Lilly White" and the top stone was advertised as a Washita, my guess one of the courser stones.

I had time to put metal to stone tonight. When you reach a certain age sleep isn't easy and sharpening is one of the few thing you can do and not wake the house. As expected from just feeling the stone surface the stone is very fast, my guess somewhere between a coarse India and a med India, It will be interesting to see where it settles in after use. My guess it will be close to a med India.

Anyway it could be a nice stone to add to your kit.

ken

Saturday, November 28, 2020

Gumbo and Other Things

 Fall and Winter is when Chicken and Sausage Gumbo comes out to play in Cajun land. While AZ is a long way from South LA I had a hankering for a bowl of Gumbo. There was a pot of chicken stock and boned chicken in the fridge, I just needed green peppers and some sausage to make a little bit of heaven. 

When making the roux I wimped out and stopped the roux at a dark chocolate instead of working without a net and going on to Black.  Truth is while black roux is a little richer flavor the difference is minor and the risk is great. BTW, it sure was/is a good pot of Cajun gumbo. 

If you have never been to the Lafayette, Breaux Bridge area of LA you likely have never had a good Cajun Gumbo. It is totally different than Creole which is the Gumbo most folks are familiar with and something I will eat only to be polite.

On to something completely different:

A lot of time in the shop I take things for granted. As an example my jointer push appliance. If you use a powered jointer you need a good and safe way to push the work over the cutting head. The best I've found is one I've used for several years, well may be more than several. It is easy to cut out and keeps the hand and fingers safe.


Another are doe's foot sticks to help hold wood for planing. A stop, a doe's foot and a holdfast is all that is needed to hold work flat on the bench. It is much faster than using a tail vise. The top appliance is for holding a board vertical for planing the edge, also faster than using a vise to hold the work. Another advantage of the appliance is immediate feedback if your technique sucks😇.


  Just some simple shop made appliances that are in almost daily use in my shop.

Friday, November 27, 2020

Portable Shavehorse

Making a portable Shavehorse.
 


 If you squint that pile of wood is most of a portable shave horse. Right behind the pile is the current shavehorse that is not portable. The new one will rip off Jason Gallagher's take on Tim Manney's dead head horse. See below.


I have a couple of boards of Honey Locust that have been in the wood pile for several years to use for the rails and table (photo above). Wood for the other parts to be decided later.

Getting ready for four months, maybe as many as six months, living in the motorhome this coming summer. The old shavehorse was a PITA to transport and take apart, put back together, so much so I didn't use it much on last years trip to Oregon.

ken

Thursday, November 26, 2020

Thanksgiving

 Thanksgiving during the Pandemic. Just the two of us, no turkey and dressing or even jellied cranberry. Just a picnic in the back garden with fresh bread, cheese, salmon, wine, and a lot of Facetime.  Hope all stayed safe and we can have a more traditional holiday next year.

Thought I'd add a photo of the bread and Mincemeat pie:


 

ken

Well there is always a positive thing, wine and cheese with a good fresh bread is great, and with two of you less dishes to clean :)
Happy Thanksgiving, we are living strange times but still, being healthy and enjoying a new morning is a gift.
Enjoy your wine!

ReplyDelete
Replies

Thanks Lionel,

I read an article today advocating a second national Thanksgiving Day once Covid 19 is under control. I'm all for it and while we are at it add Juneteenth as well.

T-Day has always been my favorite holiday because it is about family and friends and even though "Black Friday" has been hijacked T-Day itself hasn't and likely can't.

IIRC your T-Day is early October, I hope it went well and all stayed safe.

ken

Tuesday, November 10, 2020

One Screw

 There is always one screw or nut that can't be removed on any project. If there are laws of home repair that is the first one.

MsBubba asked for added shelf's in the hall pantry and like all SO's with a brain the only answer is "yes dear". The first shock was the price of clear Pine, $8 USD a board foot at the local HD. I walked away the first time thinking I could build the shelf's out of Cherry for the same price but ended up returning for the pine to keep from needing to do glue-ups of either Alder or Poplar. By the time I had all the boards, supports, and the Plywood needed there was a new charge on the AmEx of over $400 USD.

After a little butt scratching and a lot of rolling around on the floor the shelf's are installed, sliding doors rehung and the project finished. Hold on Pine breath. As re-installed the outer sliding door has a bow that causes it to hang on the inter door. Not a biggie, take the doors off and re-hang, 15 minutes tops. Wrong again Stripped Screw breath and that is where the project stands. One screw has it stopped until I can find my screw removal kit either in the shop (I know I have one) or at Ace when they open.

I think this sums up the last four years and the coming next four:

Image For the complete image follow the link.

 https://twitter.com/thetimes/status/1325762537732845581/photo/1 

Credit  @thetimes

Sunday, November 08, 2020

I'm still Sorting It Out

Relief, Joy, Sadness, and Hope.

Relief because in a little over two months Trump, his evil spawn, and enablers will be out of power. Joy because the fear has gone. Sadness over 70,000,000 Americans voted for the evil bastard after four years of knowing who he is. Hope because seeing the dancing for joy around America and noticing the age of most. The future, if we make it, will be better once my generation dies.

I hope the vermin will crawl back under the rocks from which they came in 2016 and I never see another fat fuck ridding a scooter in Costco wearing a "Fuck Your Feelings" T-shirt.

Mazel Tov,

ken

Saturday, October 24, 2020

Borat

 I watched Borat last night along with I expect millions. Words are hard to find, Cohen holds a really ugly mirror up for us to see and of all the views Rudy Giuliani's performance was the most unbelievably gross. 

How anyone that knew he was being recorded, and I'm not talking about the bedroom portion, could be so skin crawling disgusting and just fucking dumb was again unbelievable.  The questions about our country just from Giuliani's scene are frightening.  

It was not my most enjoyable hour or so but was time well spent.

ken


Thursday, October 22, 2020

MsBubba Has Landed

 After 20 hours driving up to Medford, ~30 hours resting and waiting for MsBubba, and just under 24 straight hours driving home we are back in Tucson. The big difference in time up and back is mostly the 55 mph speed limit on towed vehicles in CA and a little traffic in LA.

Biggest observation of the trip was the increase in 18 wheeler traffic. While on I-5 and I-10 there would be 5 to 10 miles of trucks running nose to tail and if one pulled into the hammer lane to pass you were stuck behind it for miles. The other was all the rest areas were full and many times blocked where you could not pull in much less stop for a rest and any flat area along the highway was also chock full of trucks at night. 

There is a better way to move goods and we need to transition to it soon.

It is good to be home and all back to normal with MsBubba cleaning and pointing out I haven't a clue about dirt. BTW, she likes her new kitchen trash can and even more amazing it only took a couple of hours before she noticed it.

ken

Wednesday, October 14, 2020

Going To Retrieve MsBubba

 This post is a little early, I don't leave Tucson to pick up MsBubba and the Honda Fit in Oregon until Saturday. Between now and leaving there will be little time for the shop or anything else other than erasing three months of evidence that there was no adult supervision for either Sweet Maggie Dog or myself.

The Motorhome is still missing the right hand mirror so we will be going in the truck, faster, cheaper, but nowhere near as comfortable. Bottom line a quick run to Medford, OR to be in position to meet MsBubba on the 19th. RON in Medford and hit the road hard on the 20th. Medford is just a little over 1100 miles from Tucson, basically a Saddlesore 1000 Iron Butt ride which is the easiest of all the IBA rides. Damn I miss my motorcycle and doing IBA rides and rallies but there is a time for everything and its time, like flying airplanes, has passed. The only question is can MsBubba sit in the truck that long. Sweet Maggie Dog and myself, no problem.

See you guys on down the road,

ken 

Monday, October 12, 2020

Shaping The Arms

Shaping the arms, first rough cut with the band saw, the draw knife followed by spoke shave, and now rasps. They are starting to look like bow saw arms.

 

 
 
A good rasp is a wonderful tool, getting to a finished arm would be very hard without at least one or two.

A week from today I will meet MsBubba in Medford, OR for the drive back to Tucson. The mirror still isn't fixed on the Motorhome so Sweet Maggie Dog and I will drive to Oregon in the truck. It is a quicker and less expensive trip but no where near as comfortable. We will come on straight back to Tucson from Medford instead of spending a few days on the beach. My guess is MsBubba is ready to be home anyway, she didn't fuss much when I told her about the change of plans.
 
ken

Sunday, October 11, 2020

Starting The 12" Turning Saw

I've both Beech and Hickory in the shop and have gone back and forth on which to use. I may end up making one from each wood, today I'm working with a Hickory blank. I'm sure there are a dozen ways to start but my first step is to drill the pin holes while things are still square.
 

 

The next step will be roughing out the shape with the band saw then refining it with a draw knife, spoke shaves, and rasps. While not necessary a shave horse is handy.

ken

Saturday, October 10, 2020

Finished Filling Out My 2020 Ballot

 I've almost finished voting, the ballot is filled out and sealed all that is left is dropping it off tomorrow. No one person can fix the last 40 years but if each of us votes we can begin the job of fixing the last 4.

 

Vote as if your life depended on it, because in fact it does.

As a reward for a job well done I'm having a big bowl of Blue Bell Homemade Vanilla ice cream. You can't get more Texan than that.

 ken

Friday, October 09, 2020

12" Turning Bow Saw

 I've many posts praising the TFWW bow saw. Of all the turning saws on the market and that includes the Knew Concepts saws the !2" bow saw is the best of the lot. Full disclosure: While I do not have or have tried all the Knew Concepts saws I have a couple and while nice they do not hold a candle to the TFWW 12" bow saw. For a couple of reasons, the first is simply a 12" saw will cut faster than a 6" or even a 8" saw. The second is the TFWW saw blades. They are thinner than a coping saw blade and will fit the kerf of a Japanese pull saw as will a fret saw blade. The difference between the TFWW blade and the fret saw blade are two things, first fret saws are slower than xmas and fret saw blades break. In the years I've used the 12" bow saw I've never broken a blade.  Faster than either a coping saw or fret saw, turns as easily as either, the saw blades do not break, and cheaper than many of the Knew Concepts saws. What's not to like.

TFWW 12" bow saw with saw kit:


I was looking around for a small project to piddle with and thought "self you could use a second bow saw so one could have a fine tooth blade and the other course tooth". While not a done deal, I should have a second bow saw soon. Photos of the build to follow.

ken

 

Saturday, October 03, 2020

I Lied, One More Trash Can

 I want to post a photo of the final pull because you can't see it in the last photos.  It is simple, easy to make, and fits the hand well. In keeping with the rose head nails the pull is attached to the lid with two nails.


ken


Friday, October 02, 2020

Fat Bottom Girls Make the Rocking World Go Around

A artist friend sent this link https://www.thisiscolossal.com/2020/09/nicolas-lichtle-a-la-fin/ Which in turn made me think of one of my favorite versions of the Queen song "Fat Bottom Girls Make the Rocking World Go around" https://youtu.be/yPK5NAzqf64 


Last of the Kitchen Trash Can

 The kitchen trash can is finished:


And in position holding trash:


I may build another after a couple more projects are finished. The can is functional but there are a couple of small mistakes that most folks will or would not notice but I expect will bug me to distraction. Besides it is a quick fun build.

Still feeling guilty for my giddiness, but not much. If there is a god, she has a wicked sense of humor but whatever, Karma is a bitch.  

ken

Thursday, October 01, 2020

There Is a God

 

Most of Today's Shop Time Spent on Cleanup

 A lot of shop time today along with some house cleaning to get ready for MsBubba's white glove inspection once she is home, started a little after 0300 and I'm just shutting down. For all that time there is not much to show. I finished up the inside fixtures of the trash can and spent way too much time trying to figure out and make a pull for the trash can lid. Here's one of the pulls:

 

Another that has a major design flaw:


I've not a clue where my head was when I put this one together other than stuck up my ass. The one good thing I can say even thought the glue joint is end grain to long grain I sized the end grain so the glue joint is strong. At least I was thinking well enough to make a strong joint but still major head up ass. I kinda like the idea but made with a long grain to long grain joint. Finishing the lid is all that is left to do, one way or another the fat lady is singing tomorrow and the can will be holding trash before night fall.

ken