Thursday, October 06, 2016

Apron Glue Up

There are two more things to do before the planing bench is ready. First is adding an apron to the front and second is installing a crochet.

The front apron is in glue up and will be added in the AM and the crochet is marked out and will be installed after the apron.

Get all that installed , drill the holdfast/support holes in the apron and the bench will be ready for work.

A photo of the apron glue up, I'm adding a 2X to the back of the apron for better holding by the holdfasts. Once the glue sets I'll glue the apron to the slab and put Spax screws down each leg.



Shoulder update; PT said "Hit the road Jack, don't come back no more" this morning. I see the Doc on the 18th. and expect he will return me to work sometime after the first of November. It has been a good run, now if I can remember how to run a Sim.

ken

2 comments:

  1. NO sweat, just simulate it :-)

    Bob and Rudy

    ReplyDelete
  2. Oh that hurts....:-).

    Glad you and Rudy made it back.

    ken

    ReplyDelete