Thursday, January 25, 2018

Kitchen Cart

MsBubba wants a roll around cart for the kitchen, of course the answer is "yes dear: how big?" Turns out she wanted one to hold most of the small kitchen appliances, with a couple of drawers and a work surface top.

A couple of weeks ago, or maybe more like a month because of the Houston trip, I dug through the wood pile and found a 12/4 hunk of White Oak that was long enough to use for the legs and enough 5/4 Cherry for the upper aprons. I think there is another board or two of the Cherry to make the lower stretchers and shelf. If not, I'll find/buy something.

The project was kinda put on hold for Flu recovery after returning from visiting the Grandpeanut and the kids, but for the last couple of weeks I've been beavering away. At least my version of beavering away, on the cart.

All the upper mortises are chopped and the associated tenons  have been made. The Cherry was well behaved and the tenons split out very easily with only one cheek needing sawing. The last couple of days have been spent fitting tenon to mortise and I'm down the the last mortise/tenon fit when I shut the shop last night.

A couple of photos, not that you can see much other than my usual messy bench and shop.

Marking the tenons:


Fitting tenon and mortise:


Still a way to go. The bottom shelf will be open, a couple of drawers that I expect will be mounted with metal drawer slides, and a glued up Maple top. I think I'm out of Maple so a trip to the wood store is coming up.

My plan once the cart is finished is to build another travel bench for use during next Fall's PNW trip as the last travel bench has morphed into a sharpening bench.

ken

3 comments:

  1. I made one a year ago and it has been a big success. I don't cook very much, so I didn't appreciate how handy they are. Only surprise in construction was how expensive high quality casters that look good and are big enough to roll easily are. They were worth it.

    ReplyDelete
  2. Andy,

    Right now I have a set of the "red" ones. Good casters but at this point the Boss hasn't signed off on 'em. BTW,I just finished fitting the last of the big mortise and tenons. The rest are small double M/T and a couple of hidden dovetails for the top long stretcher to finish the base.

    ken

    ReplyDelete
  3. Anonymous5:12 AM

    This comment has been removed by a blog administrator.

    ReplyDelete